Thursday, September 11, 2014

LIGHT ALARMS



LIGHT ALARM - 1
This schema operates when lightweight|the sunshine} Dependent Resistor receives light. When no lightweight falls on the LDR, its resistance is high and also the transistor driving the speaker isnt turned on. When lightweight falls on the LDR its resistance decreases and also the collector of the second transistor falls. This turns off the primary transistor slightly via the second 100n and also the initial 100n puts a further spike into the bottom of the second transistor. This continues till the second transistor is turned on as onerous because it will go. the primary 100n is currently nearly charged and it cannot keep the second transistor turned on. The second transistor starts to turn off and each transistors swap conditions to provide the second half of the cycle.

LIGHT ALARM - 2


This schema is comparable to lightweight Alarm -1 however produces a louder output as a result of the speaker being connected directly to the schema. The schema is essentially a high-gain amplifier thats turned on initially by the LDR and then the 10n keeps the schema turning on till it will activate no more. The schema then starts to show off and eventually turns off utterly. the present through the LDR starts the cycle once more.

LIGHT ALARM - 3 (MOVEMENT DETECTOR)

This schema is extremely sensitive and may be placed in a very space to detect the movement of a person up to a pair of metres from the unit.


The schema is essentially a high-gain amplifier (made of the primary 3 transistors) that is turned on by the LDR or photo Darlington transistor. The third transistor charges the 100u via a diode and this delivers turn-on voltage for the oscillator. The LDR has equal sensitivity to the photo transistor during this schema.
 
 
 
Streampowers

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.